Prevents dust, dirt, sand, water and other machine-damaging contaminants from compromising the integrity of industrial fluids while they are stored, transported and dispensed Allows for clear, accurate fluid identification. Choose between colored write-on tags or perforated blank tags designed to be used with our web-based labeling system. Either gives you the ability to color code and accurately label your iCanTM containers. Square drums give you large, flat surface areas for adequate labeling. All iCanTM drums and lids are made from rugged High-Density Polyethylene (HDPE) that is designed to withstand harsh environments. Because iCanTM products are made from plastic, they will not rust or flake, and are easily cleaned. iCanTM Pour Lids are available with 6mm (1/4"), 12mm (1/2") or 25mm (1") nozzles, enabling you to choose the correct Pour Lid for your particular application. iCanTMiPouches stick onto any iCanTM drum, and give users the ability to store important documents such as MSDS sheets, operating instructions or fluid data sheets with the container at all times. 1" wide fill port with screw cap allows iCanTM drums to be re-filled without having to remove the entire lid, reducing the likelihood of contamination ingress. Accessory ports are molded directly into all iCanTM lids. These ports are ideal for installing desiccant breathers and/or quick connect couplings. Pour lids include one port with a 1/2" NPT female tread. Pump lids include two ports - one 1/2" NPT female thread and another 3/8" NPT female thread. Unlike "button" style breater vents that require constant pressure, iCan'sTM on/off light-switch style vent improves safety by allowing users a full five-finger grip while doing top-offs. Provides safe and easy transporting and accurate pouring. English and Metric graduation markings are molded into all iCanTM drums, allowing you to measure how many quarts or liters are dispensed. Flexible iCanTM Extension Hoses screw onto the end of the Pour Lid spouts, and give you an extra nine inches of reach. Allows users to quickly and cleanly dispense industrial fluids into tight, hard-to-reach areas.